Leak Repair kitsKit - "F"

SpillCorral DSC4641SpillCorral™

When a pipe, tank or drum springs a leak, time is of the essence. That’s especially true if it contains hazardous product.

Major repairs can take considerable time. Fortunately, InduMar provides emergency repair kits that can plug the holes until major repairs can be made. These kits keep you and your company safe even when pipes, tanks or drums let you down.

First Response™ Kits Data Sheets

Contact Us to Order the Emergency Kit you need

First Response™ Leak Repair Kit

Everything in one box for maintenance and safety teams to quickly respond to most common leaks, cracks, and gashes in pipes, drums and tanks. Each kit includes a small, medium and large size of the Stop It® Pipe Repair System, five Fix Stix epoxy, 18 assorted wooden plugs, rubber hammer, two Plug-N-Dike Plug Rugs, three Plug Patties, lead wool filler pack, hot/cold hose repair tape.

First Response™ Kit

SpillCorral™

SpillCorral™ rounds up fugitive fluids in industrial settings. The flexible berm is constructed of multiple proprietary urethanes, with the contacting tacky surface providing adhesion and the upper body providing a flexible barrier. SpillCorral™ is installed by firmly placing on any oil-free, flat surface. The bottom of the barrier forms a physically reversible bond to most surfaces, allowing the barrier to be reused.

SpillCorral™ provides a temporary solution to leaks and spills by diverting the flow of liquids away from drains and sensitive equipment or by retaining the fluid until it can be recovered. The 4 inch height of the barrier ensures that signifcant volumes can be retained. The 5 foot length and flexible character allows the barrier to be easily installed in a variety of geometries. Multiple sections can be connected to contain larger spills. These sections are assembled by simply mating the end connections found on each barrier.

spill corral b

Technical Specifcations
Base Material: Proprietary urethane
Dimensions: 4” x 4” x 5’
Shipping Weight: 13.2 lbs (6 kg)
Color: Safety orange
Units: 1 per box
Intended Use: Spill containment
Number of Uses: Multiple when cleaned and stored properly between uses.
Inspect before each reuse.
Containment Area: Variable, through connection of multiple barriers
Storage: Original box on protective release paper
Chemical Resistance: Excellent when used with hydrocarbons, mineral oil, lubricants,aqueous salt solutions
Avoid Use With: Inorganic acids, ketones, chlorinated solvents
Temperature Limits: Urethane stable to 220ºF

Stop It® Pipe Repair Clamps

The Stop It® Pipe Repair Clamp conforms to most irregular surfaces and controls most pressures with simple hand-tightening – a simple solution for not-so-simple situations.

The polytetrafluoroethylene (PTFE) gasket on these stainless steel clamps provides extraordinary chemical resistance and works in temperatures ranging from -450°F to +650°F so you can place it and forget about it. The clamps can also be combined to fit pipes with larger diameters.

Stop It® Pipe Repair Clamp Data Sheets

Technical Information

Physical Properties

Adjustment Range: 6” (15.2 cm) down to ½” (1.2 cm)

Materials: Band and housing made of corrosion resistant 301 CRES. Heat-treated alloy screw and nut are cadmium.

Temperature range: -450°F to 600°F (-268°C to 316°C)
Octagon Size: 1” (2.54 cm)
PTFE Thickness: 1/8” (0.31750 cm)
Pressure Retention: Approximately 300 PSI when tightened with a hand tool. (Note: Make sure that pipe is in proper condition before applying any type of clamp.)
Inert to all Chemicals: Only molten alkali metals and elemental fluorine will affect this material.

 

 

Our line of PTFE-lined stainless steel patch clamps provide extraordinary chemical resistance and work in temperatures ranging from -450°F to +650°F so you can place it and forget about it.

 

Emergency Leak Control Kits "D" & "AE"

For hazardous-material leaks in any type of low-pressure vessel, universal kits contain everything needed to patch cracks, gashes and holes of all shapes in tanks and drums. All bolts, back-up plates, and hardware are manufactured from 304 stainless steel.

  • Kit “D” contains two toggle-bolt ball plugs, six toggle-bolt surface plugs, two T-bolt crack patches, five self-tapping screw patches, nine assorted wooden plugs, Fix Stix epoxy, Plug-N-Dike Plug Pattie, lead wool pack, hot/cold hose repair tape, sorbent pad, 8” x 12” solid neoprene gasket material, steel drift pin, OSHA-approved 200’ roll of barricade tape, tools for installing all patches, and heavy duty carrying case.
    Kit "D"
  • Kit “AE” contains all the items listed for kit “D,” plus items for larger holes, cracks and gashes. These include one 8” x 12” stainless steel plate lined with ¾”-thick soft neoprene material and three T-bolts with preassembled wingnut washer combos. A second 8” x 12” stainless-steel neoprene-backed plate is included with hardwood cribbing ladder patch and two 22’ heavy-duty nylon straps.
Kit "AE"

Pipe Leak Control Kits "C2", C"3"

Designed to quickly respond to leaks in straight runs of piping. Simply snap the clamp around the pipe, drop bolt head through open-slotted lug, and tighten nuts. Versatile clamps respond to water, wastewater, fuel, chemical, air and gas leaks.

    • Repair clamps are made of corrosion-resistant 304 stainless steel, lugs are made of rugged-ductile iron and shop coated for added protection. Bolts are plated for longer life. A choice of gasket material offers superior resistance to oils, aromatic and aliphatic hydrocarbons, condensates, gasoline and natural gas.
    • All External Pipe Leak Control Kits include extra-solid neoprene and closed-cell foam gasket material for odd-sized, out-of-round, and corroded pipe applications. Accompanying tools are available in standard or non-sparking versions. Kits are packaged in a heavy-duty carrying case.
    • Series “C-2” contains 10 assorted clamps for ½” through 4” diameter pipe, extra gasket material and installation tools. Clamp sizes are 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”, 3 1/2”, 4”.
Option - Available with Non Spark Tools
Kit "C2"
    • SERIES “C-3” contains three large clamps for 5”, 6” and 8” diameter pipe, extra gasket material and installation tools. Clamp sizes are 5”, 6” and 8”.
Kit "C3"

Pipe Plugger Kit "C-1"

Quickly plugs open-ended pipes, allowing you to instantly plug knocked-off pipes carrying water, fuel, chemicals and gas. Great for knocked-off gas meters and tank truck discharge valves.

  • 1” to 5” sizes have pressure-relief vents to help get the plugs seated under pressure. Pressure relief vents on 1 1/2” through 5” plugs can connect to enclosed valve and discharge hose. This enables fluid or gas to be rerouted to another line, discharged to a recovery vessel or flared. The Pipe Plugger Kit can also be used for drain line cleaning and nitrogen purging operations.
  • SERIES “C-1” contains 10 stainless steel pipe plugs, valve and discharge hose set, all necessary tools for installation and heavy-duty carrying case. Plug sizes are 3/4”, 1”, 1 1/4”, 1 1/2”, 1 3/4”, 2”, 2 1/2”, 3”, 4”. A separate 5” “C-1” plug is also available.
Series "C-1"

Roll-over Kit "F"

Kit - "F"

Covers a large hole, crack, or gash in a large vessel or tank with a patch that conforms to the curvature of the vessel. The patch uses a variety of T-bolts to support itself directly to the hole. The leak is then sealed by tightening the compression bolts around the frame, conforming the patch to the vessel.

  • Series “F” contains one stainless-steel patch measuring 13” x 23” with 3/4” neoprene gasket. One stainless-steel support frame with compression bolts, three stainless-steel T-bolts with preassembled wingnut washer combos, all necessary tools and heavy-duty carrying case.

 Leak Repair kits

 

 

 

"I work tour maintenance. We do emergency maintenance. We have to get things back up and running. Works great on emergency repairs and can be put back in service until shut down to make permanent repairs later on. Thank You!"

– A major U.S. pulp and paper plant.