• headerpic3
  • headerpic2
  • headerpic1
  • headerpic riserrescue
Print

Fix Stix™ Technical Information

Fix Stix™ Physical Properties

Working Time: Two minutes Set
Time: 20 minutes
Maximum Use Temperature: 300°F (149°C) Dielectric Strength: 300 volts/mil at 0.15 cm Volume Resistivity: 1 x 1012 ohms/cm
Density: 18.5 lb/gal (2.2 gm/cm3)
Compression Strength: 12,000 psi
Tensile Strength: 6,000 psi
Modulus of Elasticity: 6 x 105 psi
Lap Shear Strength (steel): 900 psi
Izod Impact: 0.3 lb/in (notched)
Hardness (Shore D): 80

Ordering Information

Packaged: 28 units/case
Product Dimensions: Each unit 3.6" (9.2 cm) long x 7/8" (2.2 cm) wide
Case Dimensions: 12" x 9" x 5" (31 cm x 23 cm x 13 cm)
Case Weight: 4.75 lbs. (2 kg)

msds_icon_50x47 Materials Health, Safety And Environmental Sheet (pdf)

Leak Repair

About InduMar

InduMar Products, Inc. has been providing leak repair solutions for 25 years. We operate in all markets where pipe leaks are a problem. In particular our areas of expertise lie in:

  • Refinery/Petrochemical
  • Offshore oil and gas production
  • Commercial Marine
  • Mining
  • Power

"We used STOP IT® on a 1" stainless steel pipe used as a conduit for wiring our sensors in our cargo tanks– the sensors measure the level of cargo in the tank. The 1" pipe developed a crack allowing gasoline to damage the sensors. We used STOP IT® to repair the crack until it could be welded. STOP IT® is a great product, keep up the good work!"

A Chemical Tanker out of Louisiana