Fusion Tape TM

Fusion Tape™ won’t crack or separate with sudden shock, vibration, expansion or contraction, making it an easy, secure long-term solution to tears and rips in wires, pipes and hoses.

This heavy-duty, self-bonding, self-fusing, seamless silicon tape is not tacky and requires no heat or tools to promote fusion.

  • Bonds into a permanent, inseparable, cohesive insulator at room temperature.
  • Has a dielectric strength of 400 volts/mil and works over a wide range of temperatures.
  • Can also be used as a primary cable insulation where Class H temperatures (180°C/356°F) are present.
  • Resists moisture and ozone, making it an excellent environmental insulator.

Fusion Tape™ Data Sheets

Contact us to Order Fusion Tape™

 

Physical Properties

Operating Temperatures (Intermittent): -85°F to 500°F (-65°C to 260°C)
Operating Temperatures (Continuous): -76°F to 392°F (-60°C to 200°C)
Dielectric Strength, Minimum: 400 volts/mil (.020” thick)
Dielectric Constant, 1 KHz: 2.95
Dissipation Factor, 1 KHz: <.0004
Volume Resistivity: 3 x 1014 ohms/cm
Cold Brittle Point, Maximum: -65°C
Water Absorption: 3% maximum by weight
Tensile Strength: 700 psi minimum
Ultimate Elongation: 300% minimum
Tear Resistance: 85 ppi
Durometer Hardness: 50 Shore A room cured 24 hours
Meets or Exceeds: U.S. Military Spec A-A-59163 (formerly MIL-I-46852C) Type II Triangular Guideline and Type I, Rectangular, Self-fusing silicone rubber tape.