viscotaq-banner
Print

Fusion Tape™ + Plus - Technical Information

Fusion Tape™ + Plus Physical Properties

 

Operating Temperatures (Intermittent): -85°F to 500°F (-65°C to 260°C)
Operating Temperatures (Continuous): -65°F to 500°F (-54°C to 260°C)
Dielectric Strength, Minimum: 300 volts/mil (.040" thick); 275 volts/mil (.050" thick)
Dielectric Constant, 1 KHz: 2.95
Dissipation Factor, 1 KHz: <.0004
Volume Resistivity: 3 x 1014 ohms/cm
Cold Brittle Point, Maximum: -65°C
Water Absorption: 3% maximum by weight
Tensile Strength: 700 psi minimum
Ultimate Elongation: 300% minimum
Tear Resistance: 85 psi
Durometer Hardness: 50 Shore A room cured 24 hours

 

Item # Dimensions (TH x W x L) Color Meets Mil Spec No. of Ply Total Thickness Voltage
38750Y
38750K
40Mil x 1" x 36' Yellow or
Black
MIL-I-46852 1
2
3
20MIL
40MIL
60MIL
5,500
11,000
16,500
38753Y
38753K
50Mil x 1-1/2" x 36' Yellow or
Black
MIL-I-46852 1
2
3
25MIL
50MIL
75MIL
6,875
13,750
20,625
38755Y
38755K
50Mil x 2" x 36' Yellow or
Black
N/A 1
2
3
25MIL
50MIL
75MIL
6,875
13,750
20,625

 

msds_icon_50x47 Materials Health, Safety And Environmental Sheet - (pdf)


Flyer - (pdf)

About InduMar

InduMar Products, Inc. has been providing leak repair solutions for 25 years. We operate in all markets where pipe leaks are a problem. In particular our areas of expertise lie in:

  • Refinery/Petrochemical
  • Offshore oil and gas production
  • Commercial Marine
  • Mining
  • Power

"We used STOP IT® on a 1" stainless steel pipe used as a conduit for wiring our sensors in our cargo tanks– the sensors measure the level of cargo in the tank. The 1" pipe developed a crack allowing gasoline to damage the sensors. We used STOP IT® to repair the crack until it could be welded. STOP IT® is a great product, keep up the good work!"

A Chemical Tanker out of Louisiana