STOP IT® is available in four sizes: 2"×4', 2"×12',
and 4"×12' and 4"×25'
This information is presented in nominal sizes. Actual diameters vary
with the type of pipe or tube, and with thickness of fittings. When repairing
a fitting use the recommendation for the next, larger-size pipe as your guide.
Product Selection Guide
Find pipe diameter and line pressure to determine
number and size of kits to apply.
Nominal Pipe Diameter
50 PSI (10 Plys)
150 PSI (15 Plys)
400 PSI (20+ Plys)
1/2"
1 (2X4)
1 (2X4)
1 (2X4)
3/4"
1 (2X4)
1 (2X4)
1 (2X4)
1"
1 (2X4)
1 (2X4)
2 (2X4)
1-1/4"
1 (2X4)
2 (2X4)
3 (2X4)
1-1/2"
2 (2X4)
2 (2X4)
1 (2X12)
2"
1 (2X12)
1 (2X12)
1 (2X12)
2-1/2"
1 (2X12)
1 (2X12)
2 (4X12)
3"
1 (2X12)
2 (4X12)
2 (4X12)
3-1/2"
1 (2X12)
2 (4X12)
2 (4X12)
4"
1 (2X12)
2 (4X12)
3 (4X12)
5"
2 (4X12)
2 (4X12)
3 (4X12)
6"
2 (4X12)
2 (4X12)
4 (4X12)
8"
1 (4X25)
2 (4X25)
2 (4X25)
10"
1 (4X25)
2 (4X25)
2 (4X25)
12"
2 (4X25)
2 (4X25)
3 (4X25)
14"
2 (4X25)
3 (4X25)
3 (4X25)
16"
2 (4X25)
3 (4X25)
4 (4X25)
18"
2 (4X25)
3 (4X25)
4 (4X25)
>18”
larger diameter pipe
For all diameters over 18” contact
InduMar for detailed application instructions
All statements, technical information and
recommendations contained herein are based on information and tests we
believe to be reliable.
The accuracy or completeness thereof are not guaranteed. Since STOP IT® is a hand-applied product, results
will vary with the expertise of the product's applicator. Recommendations regarding the number of rolls needed,
and STOP IT®'s pressure retention capabilities assume the applicator has some experience with applying STOP IT® PIPE
REPAIR SYSTEM.
Since conditions of use are outside our control, the purchaser should determine
the suitability of the product
for his/her intended use and assumes all risks and liability whatsoever
in connection therewith.
