From a Mine in
Illinois: STOP IT® was used on a rubber hose
that had a hole approximately 3/8" wide × 3" long. The hose
was 12" in diameter and carried magnetite and water. Four rolls of
4"×12' STOP IT® were used to seal this leak.
Quote: "This pipe was approximately eight
feet from the pump and is under a lot of pressure and
also moves under pressure. Repairing this hole helped
us to keep running coal on our weekly start up."
Steel Manufacturer in Indiana: Two rolls of 2"×12' STOP
IT® were used on a 4" rubber hose carrying hydrochloric acid. The
pipe's operating pressure was 60psi with a temperature of 80°F. STOP
IT® sealed the leak completely.
Quote: "I needed STOP IT® because of holes
in hose. Hose could not be replaced due to location in a
wastewater manhole."
Corrosion in Pennsylvania: A steel plant in
Pennsylvania used two rolls of 4"×12' STOP IT® to seal a leak,
caused by corrosion, on a 4" diameter black iron pipe carrying
process water.
