Compatibility Generally, STOP IT® may be used with products
that are compatible with
polyurethane plastic. The end user must always determine the suitability
of the product for its intended use and recognize that the durability
of the repair may be affected by strong acids or bases.
Potable Water STOP IT® is accepted for use on potable water
lines by the WRC (UK). The FIX STIXTM EPOXY included with each kit is NSF certified.
Safety Features Even under extreme pressures, the STOP IT® Pipe Repair Tape will not shatter or crack.
STOP IT® releases pressures slowly.
When tested to the failing point in laboratory conditions failure was indicated by
a reduction in line pressure and seepage.
Physical Properties Shelf Life:Two years
from date of purchase when stored at 40°to 83°F (5° to 28°C) Color:White or black Tensile Strength (ASTM D 638-111):3,920 psi (275 kg/cm2) Bond Strength (ASTM D 2095-72):230 psi (16 kg/cm2) average Flexural Strength (ASTM D 790-1-B):2,260 psi (159 kg/cm2) Durometer Hardness (ASTM D 2240):82 (Shore D) Pressure Retaining Capability:Recommended for pressures up to 400 psi (28 kg/cm2) Temperature Resistance: Continuous: -20° to 250°F (-29° to
121°C)
Intermittent: 250° to 500°F (121° to 260°C) Set Time:3 to 5 minutes
at 50° to 80°F (10° to 27°C) Cure Time:at 1/2" thick
(1.27 cm) - 30 minutes
Ordering Information Packaged:Ten rolls/case
Product Dimensions: 2 inch x 4 feet (5.08 cm x 1.2 m) - approximate case weight- 4 lbs. (1.8 kg)
2 inch x 12 feet (5.08 cm x 3.6 m) - approximate case weight- 6 lbs. (2.7 kg)
4 inch x 12 feet (10.16 cm x 3.6 m) - approximate case weight- 8 lbs. (3.61 kg)
Case Dimensions:22" x 9.5" x 4.5" (56
cm x 24 cm x 13 cm)
Military/NSN Order Information
InduMar's Cage Code Number: ØDMC6
National Stock Numbers (NSN): 4730-01-301-3686 -- 2 inch x 4 feet STOP IT®
4730-01-301-3687 -- 2 inch x 12 feet STOP IT®
4730-01-301-3688 -- 4 inch x 12 feet STOP IT®
