Toll Free: +1 (800) 523-7867
|

Stop It® Pipe Repair System

Stop It® Pipe Repair Clamp

Leak Sealing Products

Stop It® Pipe Repair Clamp

While our specialty is providing composite-based solutions for pipe leaks and remediation, our product line also features universal clamp couplings, bolted couplings, flanged adapters, service saddles, tapping sleeves, expansion joints and others.

The STOP IT® Pipe Repair Clamp conforms to most irregular surfaces and controls most pressures with simple hand-tightening – a simple solution for not-so-simple situations.

The polytetrafluoroethylene (PTFE) gasket on these stainless steel clamps provides extraordinary chemical resistance and works in temperatures ranging from -450°F to +650°F so you can place it and forget about it. The clamps can also be combined to fit pipes with larger diameters.

STOP IT® is a registered trademark of InduMar Products, Inc.

 

Adjustable PTFE Pipe Repair Clamp

Adjustment Range: 6” (15.2 cm) down to ½” (1.2 cm)

Materials: Band and housing made of corrosion resistant 301 CRES. Heat-treated alloy screw and nut are cadmium.

Temperature range: -450°F to 600°F (-268°C to 316°C)

Octagon Size: 1” (2.54 cm)

PTFE Thickness: 1/8” (0.31750 cm)

Pressure Retention: Approximately 300 PSI when tightened with a hand tool. (Note: Make sure that pipe is in proper condition before applying any type of clamp.)

Inert to all Chemicals: Only molten alkali metals and elemental fluorine will affect this material.

Part No Description Case Quantity Case WT
(lbs)
25267 PTFE Faced Clamp 10 2

Complete the form below to request documents.

* Indicates Required Selection

"*" indicates required fields

Please select each product for which information is being requested. Multiple products may be selected at the same time. Documents will be immediately forwarded by email.
For which products are you requesting documents? (select all that apply)*

close-link
error: Content is protected !!