Stop It® Technical Info
Compliant with US DOT 49CFR parts 192 and 195. Testing was performed under the ASME PCC-2 Article for ASME B31.1, B31.4 and B31.
Generally, Stop It® may be used with products that are compatible with polyurethane plastic. The end user must always determine the suitability of the product for its intended use and recognize that the durability of the repair may be affected by strong acids or bases.
No visible changes in Stop It® after an immersion term of 35 days in the following chemicals:
Ammonium Hydroxide (10%)
Decyl Ammonium Chloride
|Hydrochloric Acid (10%)
Sodium Hydroxide (50%)
Sulfuric Acid (10%)
Sulfuric Acid (25%)
Xylenes, Mixed o-, m- and p
Stop It® is accepted for use on potable water lines by the WRC (UK). The FIX STIX™ EPOXY included with each kit is NSF certified.
Even under extreme pressures, the Stop It® Pipe Repair Tape will not shatter or crack. Stop It® releases pressures slowly.
When tested to the failing point in laboratory conditions failure was indicated by a reduction in line pressure and seepage.
Two years from date of purchase when stored at 40°to 83°F (5° to 28°C)
White or black
Tensile Strength (ASTM D 6039):
24,950 psi (1754 kg/cm2)
Flexural Strength (ASTM D 790):
12,005 psi (844 kg/cm2)
Durometer Hardness (ASTM D 2240):
63 (Shore D)
Pressure Retaining Capability:
Recommended for pressures up to 400 psi (28 kg/cm2)
Continuous: -20° to 250°F (-29° to 121°C) Intermittent: 250° to 500°F (121° to 260°C)
3 to 5 minutes at 50° to 80°F (10° to 27°C)
at 1/2" thick (1.27 cm) - 30 minutes
Military/NSN Order Information
InduMar's Cage Code Number:
National Stock Numbers (NSN):
4730-01-301-3686 -- 2 inch x 4 feet Stop It®
4730-01-301-3687 -- 2 inch x 12 feet Stop It®
4730-01-301-3688 -- 4 inch x 12 feet Stop It®
4730-01-600-0273 – 4 inch x 25 feet Stop It®