viscotaq-banner
Print

StopIt HP™ Technical Info

By InduMar Systems, LP

High Pressure Leak Sealant Technology

 
ABS Design Assessed

Compliant with US DOT 49CFR parts 192 and 195.  Testing was performed under the ASME PCC-2 Article for ASME B31.1, B31.4 and B31.8

msds_icon_50x47 Materials Health, Safety And Environmental Sheet (pdf)

Physical Properties

Sealant                 
Shelf Life: 6 months from date of purchase when stored at 40° to 83°F (5° to 28°C)

Color:

Component 1 - clear
Component 2 - straw
Fiber - yellow (other options available)

Mixing Ratio:

As supplied, dual cartridge dispenser

Pot Life:

8-10 minutes at 72°F (22°C), after mixing for films less than ½” thick

Sealant Viscosity:

Gel-like before cure

StopIt HP™ Composite Application

Recommended for pressures up to 2,000 psi (140 kg/cm2)

Maximum Operating temperature 135°F/51°C; 175°/80°C when annealed: ~4 hour at 72°F (22°C) at 1/8” thickness

 

About InduMar

InduMar Products, Inc. has been providing leak repair solutions for 25 years. We operate in all markets where pipe leaks are a problem. In particular our areas of expertise lie in:

  • Refinery/Petrochemical
  • Offshore oil and gas production
  • Commercial Marine
  • Mining
  • Power

"I've never had much faith in 'patch it' type repairs, but to avoid long downtimes at our dorms we tried your product with success. We have used this product five or six times and saved hours in downtimes. Thanks."

A major university in Maryland