Toll Free: +1 (800) 523-7867

Stop It® Pipe Repair System

Viscotaq® EZ Wrap

Corrosion Control Products

Viscotaq®EZ Wrap

An EZ solution for corrosion control

Stopping corrosion on pipes and tanks is a must in any facility – but it can be a costly, time-consuming process. Or, it used to be.

The Viscotaq® line of corrosion protection products were developed in cooperation with the leading companies in the oil-and-gas industry and polymer engineering companies to be the ultimate solution for corrosion prevention.

Viscotaq® EZ Wrap is a versatile and economical wrap for corrosion control in areas where water infiltration is a problem. The material is strengthened by a fiber mesh embedded in the middle of the material and has a white polyester non-woven fiber top layer that allows for immediate painting or coating after installation. It will adhere to any surface without a primer.


EZ Wrap is the ideal product to seal tank chimes, roofing, air conditioning inlets, and outlets and can be used for the encapsulation of lead.

  • Excellent sealing and adhesion properties
  • Immediate adhesion to steel, PE, PP, epoxy, polyurethane and PVC without roughening
  • No cure or hardening time required
  • Storage stable (dry/cool) with an unlimited shelf life

Kit Includes

Paintable backing, for pipe crossings, tank chimes and flange applications

How It Works

The elasticity of the product gives it the strength and feel of a solid yet always remains in a semi-solid state that provides high-impact strength and allows for high resistance against sheering.


Immediate adhesion to steel, PE, PP, epoxy, polyurethane, and PVC without roughening and with no cure or hardening time required.

Viscotaq EZ-Wrap Corrosion Control Pipe Wrap

Color: Gray

Odor: None

Density: 1.4

Perm rating: <0.0050 g/m2/24h/ccHg

Water Intake <0.4% (compound) Spec Electric Resistance: >1012 ohm cm

Viscosity: Visous Elastic solid (putty like)

pH: Neutral

Shelf Life: Unlimited

Max. Operating Temp.: 158°F, melting point 265°F

Min. Operating Temp.: -50°F

Adheres to Wet Surface: No

Min. Temp. (no cracks): -22°F

Application: Above and below grade applications

Part No Description Case Quantity Case WT
V105 EZ Wrap, 4″ x 24′ ; (TX 2164) 8 40
V110 EZ Wrap, 6″ x 24′ ; (TX 2166) 4 40
Other Sizes May be Available – Contact InduMar

Easy to apply
Long term protection
Non toxic
Weather/salt resistant
Works from -22°F to 158°F
Patented technology
Cold applied
Environmental friendly
No primers

UV resistant
Weather resistant
Molds and forms easily
Solves difficult problems
Compatible with dry coatings
Tested according to latest specifications
Made in the USA
Dispensed in 70 mil rolls

Complete the form below to request documents.

* Indicates Required Selection
Please select each product for which information is being requested. Multiple products may be selected at the same time. Documents will be immediately forwarded by email.
For which products are you requesting documents? (select all that apply)*