Stop It® Pipe Repair System

First Response Repair Kits

Leak Sealing Products

First Response Repair Kits

Emergency leak control solutions for emergency situations.

When a pipe, tank or drum springs a leak, time is of the essence. That’s especially true if it contains hazardous product.

Major repairs can take considerable time. Fortunately, InduMar provides emergency repair kits that can plug the holes until major repairs can be made. These kits keep you and your company safe even when pipes, tanks or drums let you down.

Materials

Everything in one box for maintenance and safety teams to quickly respond to most common leaks, cracks, and gashes in pipes, drums and tanks.

Kit Includes

Each kit includes a small, medium and large size of the STOP IT® Pipe Repair System, five Fix Stix epoxy, 18 assorted wooden plugs, rubber hammer, two Plug-N-Dike Plug Rugs, three Plug Patties, lead wool filler pack, hot/cold hose repair tape.

How It Works

Universal kits are designed to plug hazardous material leaks in any type of low-pressure vessel.

Flexibility

While STOP IT® can be used on straight runs of pipe, its conformability makes it especially useful for repairing leaks at bends, crosses, tees, or any other location.

Shelf Life: Two years from date of purchase when stored at 40° to 83°F (5° to 28°C)
Color: White or black
Tensile Strength: 24,950 PSI / in width/172 MPa
(ASTM D 3039).

Flexural Strength: 12,005 psi/82.77 MPa (ASTM 790)
Durometer Hardness: 63 (Shore D) (ASTM D 2240)
Pressure Retaining Capability: Recommended for pressures up to 400 psi (28 kg/cm2)
Temperature Resistance: Continuous: -20° to 250°F (-29° to 121°C)
Intermittent: 250° to 500°F (121° to 260°C)
Set Time: 3 to 5 minutes at 50° to 80°F (10° to 27°C)
Cure Time: at 1/2`` thick (1.27 cm) - 30 minutes

Part Number:
White/Black Stop It® Pipe Repair System Size
Packaged 10 per ctn Weight
Lbs/Kgs
24786 / 24257 2`` x 4' / 5.08cm x 1.2m 4 / 1.8
21278 / 21225 2`` x 12' / 5.08cm x 3.6m 6 / 2.7
41278 / 41225 4`` x12' / 10.16cm x 3.6m 8 / 3.6
42578 / 42525 4`` x25' / 10.16cm x 7.62m 14 / 6.3

The Stop It® Pipe Repair System has been subjected to intensive testing and complies with US DOT 49CFR parts 192 and 195, and ASME PCC-2 article 4.1.

Compatibility
Generally, Stop It® may be used with products that are compatible with polyurethane plastic. The end user must always determine the suitability of the product for its intended use and recognize that the durability of the repair may be affected by strong acids or bases.

Stop It® Pipe Repair System Data Sheets

Chemical Resistance
No visible changes in Stop It® after an immersion term of 35 days in the following chemicals:

Acetic Anhydride Ammonia
Ammonium Hydroxide (10%)
Decyl Ammonium Chloride
Diesel Fuel
Diethyl Ether
Ethyl Acetate
Ethyl Ether
Ethylene Glycol
Gasoline

Hydrochloric Acid (10%)
Lube Oil
4-Methyl 2-Pentanone
Mineral Spirits
Sodium Hydroxide (50%)
Sulfuric Acid (10%)
Sulfuric Acid (25%)
Varsol
Xylenes, Mixed o-, m- and p

Potable Water
The Fix Stix Epoxy included with each kit is certified to NSF/ANSI 61 for Drinking Water.

Safety Features
Even under extreme pressures, the Stop It® Pipe Repair Tape will not shatter or crack. Stop It® releases pressures slowly.

When tested to the failing point in laboratory conditions, failure was indicated by a reduction in line pressure and seepage.