Toll Free: +1 (800) 523-7867
|

Stop It® Pipe Repair System

Stop It® High Temperature (HT) Epoxy Resin

Leak Sealing Products

Stop It® High Temperature (HT) Epoxy Resin

When high-pressure pipes leak, the seepage can affect the environment, production and your company’s bottom line. Fixing it quickly and securely is a must – and reinforcing the pipe walls so that it never gets to that point can save the facility significant time and money later.

Stop It® can be used almost anywhere – including underwater and in chemical and military facilities – to repair chemical, steam, process and water lines. It’s an in-field repair system that can be quickly applied by one man, leaving other maintenance staff free to deal with other concerns.

Sealant Shelf Life:
Six months from date of purchase when stored at 40° to 83°F (5° to 28°C)

Color:
Component 1 - clear
Component 2 - straw
Fiber - yellow (other options available)

Mixing Ratio:
As supplied, dual cartridge dispenser

Pot Life:
8-10 minutes at 72°F (22°C), after mixing for films less than ½” thick

Sealant Viscosity:
Gel-like before cure

StopIt HP™ Composite Application
Recommended for pressures up to 2,000 psi (140 kg/cm2)
Maximum Operating temperature 135°F/57°C; 175°/80°C when annealed: ~4 hour at 72°F (22°C) at 1/8” thickness

Part Number:
White/Black Stop It® Pipe Repair System Size
Packaged 10 per ctn Weight
Lbs/Kgs
24786 / 24257 2`` x 4' / 5.08cm x 1.2m 4 / 1.8
21278 / 21225 2`` x 12' / 5.08cm x 3.6m 6 / 2.7
41278 / 41225 4`` x12' / 10.16cm x 3.6m 8 / 3.6
42578 / 42525 4`` x25' / 10.16cm x 7.62m 14 / 6.3

InduMar's Cage Code Number:
ØDMC6
National Stock Numbers (NSN):
4730-01-301-3686 -- 2 inch x 4 feet Stop It®
4730-01-301-3687 -- 2 inch x 12 feet Stop It®
4730-01-301-3688 -- 4 inch x 12 feet Stop It®
4730-01-600-0273 – 4 inch x 25 feet Stop It®

Stop It® High Temperature (HT) Epoxy Resin has been subjected to intensive testing and complies with US DOT 49CFR parts 192 and 195, and ASME PCC-2 article 4.1.

Compatibility
Generally, Stop It® may be used with products that are compatible with polyurethane plastic. The end user must always determine the suitability of the product for its intended use and recognize that the durability of the repair may be affected by strong acids or bases.

Stop It® Pipe Repair System Data Sheets

Chemical Resistance
No visible changes in Stop It® after an immersion term of 35 days in the following chemicals:

Acetic Anhydride Ammonia
Ammonium Hydroxide (10%)
Decyl Ammonium Chloride
Diesel Fuel
Diethyl Ether
Ethyl Acetate
Ethyl Ether
Ethylene Glycol
Gasoline

Hydrochloric Acid (10%)
Lube Oil
4-Methyl 2-Pentanone
Mineral Spirits
Sodium Hydroxide (50%)
Sulfuric Acid (10%)
Sulfuric Acid (25%)
Varsol
Xylenes, Mixed o-, m- and p

Potable Water
The Fix Stix Epoxy included with each kit is certified to NSF/ANSI 61 for Drinking Water.

Safety Features
Even under extreme pressures, the Stop It® Pipe Repair Tape will not shatter or crack. Stop It® releases pressures slowly.

When tested to the failing point in laboratory conditions, failure was indicated by a reduction in line pressure and seepage.

Complete the form below to request documents.

* Indicates Required Selection
  • Please select each product for which information is being requested. Multiple products may be selected at the same time. Documents will be immediately forwarded by email.

close-link