Leak Sealing Products
Stop It® Standard Temperature (ST) Epoxy Resin
Stop It® can be used almost anywhere – including underwater and in chemical and military facilities – to repair chemical, steam, process and water lines. While Stop It® can be used on straight runs of pipe, its conformability makes it especially useful for repairing leaks at bends, crosses, tees, or any other location.
Shelf Life: Two years from date of purchase when stored at 40° to 83°F (5° to 28°C)
Color: White or black
Tensile Strength: 24,950 PSI / in width/172 MPa
(ASTM D 3039).
Flexural Strength: 12,005 psi/82.77 MPa (ASTM 790)
Durometer Hardness: 63 (Shore D) (ASTM D 2240)
Pressure Retaining Capability: Recommended for pressures up to 400 psi (28 kg/cm2)
Temperature Resistance: Continuous: -20° to 250°F (-29° to 121°C)
Intermittent: 250° to 500°F (121° to 260°C)
Set Time: 3 to 5 minutes at 50° to 80°F (10° to 27°C)
Cure Time: at 1/2`` thick (1.27 cm) - 30 minutes
White/Black Stop It® Pipe Repair System Size
Packaged 10 per ctn Weight
24786 / 24257 2`` x 4' / 5.08cm x 1.2m 4 / 1.8
21278 / 21225 2`` x 12' / 5.08cm x 3.6m 6 / 2.7
41278 / 41225 4`` x12' / 10.16cm x 3.6m 8 / 3.6
42578 / 42525 4`` x25' / 10.16cm x 7.62m 14 / 6.3
InduMar's Cage Code Number:
National Stock Numbers (NSN):
4730-01-301-3686 -- 2 inch x 4 feet Stop It®
4730-01-301-3687 -- 2 inch x 12 feet Stop It®
4730-01-301-3688 -- 4 inch x 12 feet Stop It®
4730-01-600-0273 – 4 inch x 25 feet Stop It®
The Stop It® Pipe Repair System has been subjected to intensive testing and complies with US DOT 49CFR parts 192 and 195, and ASME PCC-2 article 4.1.
Generally, Stop It® may be used with products that are compatible with polyurethane plastic. The end user must always determine the suitability of the product for its intended use and recognize that the durability of the repair may be affected by strong acids or bases.
Stop It® Pipe Repair System Data Sheets
No visible changes in Stop It® after an immersion term of 35 days in the following chemicals:
Acetic Anhydride Ammonia
Ammonium Hydroxide (10%)
Decyl Ammonium Chloride
Hydrochloric Acid (10%)
Sodium Hydroxide (50%)
Sulfuric Acid (10%)
Sulfuric Acid (25%)
Xylenes, Mixed o-, m- and p
The Fix Stix™ Epoxy included with each kit is certified to NSF/ANSI 61 for Drinking Water.
Even under extreme pressures, the Stop It® Pipe Repair Tape will not shatter or crack. Stop It® releases pressures slowly.
When tested to the failing point in laboratory conditions, failure was indicated by a reduction in line pressure and seepage.