Toll Free: +1 (800) 523-7867
|

Stop It® Pipe Repair System

Stop It® Under Water (UW) Epoxy Resin

Leak Sealing Products

Stop It® Under Water (UW) Epoxy Resin

Stop It® can have you back up and running in about 30 minutes. Stop It® can be used almost anywhere – including underwater and in chemical and military facilities – to repair chemical, steam, process and water lines. It’s an in-field repair system that can be quickly applied by one man, leaving other maintenance staff free to deal with other concerns.

Shelf Life: Two years from date of purchase when stored at 40° to 83°F (5° to 28°C)
Color: White or black
Tensile Strength: 24,950 PSI / in width/172 MPa
(ASTM D 3039).

Flexural Strength: 12,005 psi/82.77 MPa (ASTM 790)
Durometer Hardness: 63 (Shore D) (ASTM D 2240)
Pressure Retaining Capability: Recommended for pressures up to 400 psi (28 kg/cm2)
Temperature Resistance: Continuous: -20° to 250°F (-29° to 121°C)
Intermittent: 250° to 500°F (121° to 260°C)
Set Time: 3 to 5 minutes at 50° to 80°F (10° to 27°C)
Cure Time: at 1/2`` thick (1.27 cm) - 30 minutes

Part Number:
White/Black Stop It® Pipe Repair System Size
Packaged 10 per ctn Weight
Lbs/Kgs
24786 / 24257 2`` x 4' / 5.08cm x 1.2m 4 / 1.8
21278 / 21225 2`` x 12' / 5.08cm x 3.6m 6 / 2.7
41278 / 41225 4`` x12' / 10.16cm x 3.6m 8 / 3.6
42578 / 42525 4`` x25' / 10.16cm x 7.62m 14 / 6.3

InduMar's Cage Code Number:
ØDMC6
National Stock Numbers (NSN):
4730-01-301-3686 -- 2 inch x 4 feet Stop It®
4730-01-301-3687 -- 2 inch x 12 feet Stop It®
4730-01-301-3688 -- 4 inch x 12 feet Stop It®
4730-01-600-0273 – 4 inch x 25 feet Stop It®

The Stop It® Pipe Repair System has been subjected to intensive testing and complies with US DOT 49CFR parts 192 and 195, and ASME PCC-2 article 4.1.

Compatibility
Generally, Stop It® may be used with products that are compatible with polyurethane plastic. The end user must always determine the suitability of the product for its intended use and recognize that the durability of the repair may be affected by strong acids or bases.

Stop It® Pipe Repair System Data Sheets

Chemical Resistance
No visible changes in Stop It® after an immersion term of 35 days in the following chemicals:

Acetic Anhydride Ammonia
Ammonium Hydroxide (10%)
Decyl Ammonium Chloride
Diesel Fuel
Diethyl Ether
Ethyl Acetate
Ethyl Ether
Ethylene Glycol
Gasoline

Hydrochloric Acid (10%)
Lube Oil
4-Methyl 2-Pentanone
Mineral Spirits
Sodium Hydroxide (50%)
Sulfuric Acid (10%)
Sulfuric Acid (25%)
Varsol
Xylenes, Mixed o-, m- and p

Potable Water
The Fix Stix Epoxy included with each kit is certified to NSF/ANSI 61 for Drinking Water.

Safety Features
Even under extreme pressures, the Stop It® Pipe Repair Tape will not shatter or crack. Stop It® releases pressures slowly.

When tested to the failing point in laboratory conditions, failure was indicated by a reduction in line pressure and seepage.

Complete the form below to request documents.

* Indicates Required Selection
  • Please select each product for which information is being requested. Multiple products may be selected at the same time. Documents will be immediately forwarded by email.

close-link