Toll Free: +1 (800) 523-7867
|

Stop It® Pipe Repair System

Stop It® Gas Riser Rehabilitation Kit

Corrosion Control Products

Stop It® Gas Riser Rehabilitation Kit

The STOP IT® Gas Riser Rehabilitation Kit is intended to strengthen the structural integrity of the riser nipple, or riser casing on non-leaking 3/4” and 1” standard anodeless risers. It is comprised of a strong knitted fiberglass tape coated with fast setting, water-activated urethane resins. The STOP IT® Gas Riser Rehabilitation Kit also includes FIX STIX®, a steel filled hand moldable epoxy that sets rock hard in only 20 minutes.

Materials

The STOP IT® Gas Riser Rehabilitation Kit is a necessary item in an inventory of products for minimizing corrosion-related operating costs.

Kit Includes

Kit Contents:

  • STOP IT® knitted fiberglass tape precoated with water-activated polyurethane resins
  • FIX STIX® hand moldable epoxy
  • Gloves for easy clean up
  • Detailed directions

How It Works

The STOP IT® Riser Rehabilitation Kit is intended to strengthen the structural integrity of the riser nipple, or riser casing on non-leaking 3/4” and 1” standard anodeless risers.

Flexibility

Improves efficiency of utility field personnel and has reliable installation quality that reduces shutdowns or relights.

Stop It® Gas Riser Rehabilitation Kit - minimizing corrosion-related operating costs
Stop It® Gas Riser Rehabilitation Kit Before & After
The STOP IT® Gas Riser Rehabilitation Kit also includes FIX STIX™, a steel filled hand moldable epoxy
Stop It Gas Pipe Corrosion Repair

Shelf Life: 2 years from date of purchase

Pressure Retention Capacity: Recommended for pressures up to 400 psi (28 kg/cm2, 27 bar)

Temperature/Heat Resistance: From -20°F up to 250°F (-29°C to 121°C) – continuous.
From 250°F to 500°F (121°C to 260°C) – intermittent

Set Time: Tack free in 3 – 5 minutes at ambient temperatures of 50°F to 80°F (10°C to 27°C)

Cure Time: Cures in 30 minutes at temperatures between 50°F to 80°F (1O°C to 27°C)

Tensile Strength: ASTM D 3039, 24,950 PSI / in width/172 MPa

Flexural Yield Strength: ASTM D 790-1-B, 12,005 PSI (844 kg/cm2)

Durometer Hardness: ASTM D 2240, 63 (Shore D)

Part No Description Case Quantity Case WT
(lbs)
GRR2x12BLK 2″x12′ BLACK (5.08cm x 3.6m) 10 6.1

Shelf Life: 2 years from date of purchase

Pressure Retention Capacity: Recommended for pressures up to 400 psi (28 kg/cm², 27 bar)

Temperature/Heat Resistance: From -20°F up to 250°F (-29°C to 121°C) – continuous. From 250°F to 500°F (121°C to 260°C) – intermittent

Set Time: Tack free in 3 – 5 minutes at ambient temperatures of 50°F to 80°F (10°C to 27°C)

Cure Time: Cures in 30 minutes at temperatures between 50°F to 80°F (10°C to 27°C)

Tensile Strength: ASTM D 6039, 24,950

Flexural Yield Strength: ASTM D 790-1-B, 12,005 PSI (844 kg/cm²)

Durometer Hardness: ASTM D 2240, 63 (Shore D)

Complete the form below to request documents.

* Indicates Required Selection
Please select each product for which information is being requested. Multiple products may be selected at the same time. Documents will be immediately forwarded by email.
For which products are you requesting documents? (select all that apply)*

close-link