Mechanical Reinforcement Products
Stop It® Gas Riser Rehabilitation Kit
The STOP IT® Gas Riser Rehabilitation Kit is intended to strengthen the structural integrity of the riser nipple, or riser casing on non-leaking 3/4” and 1” standard anodeless risers. It is comprised of a strong knitted fiberglass tape coated with fast setting, water-activated urethane resins. The STOP IT® Gas Riser Rehabilitation Kit also includes FIX STIX®, a steel filled hand moldable epoxy that sets rock hard in only 20 minutes.
Shelf Life: 2 years from date of purchase
Temperature/Heat Resistance: From -20°F up to 250°F (-29°C to 121°C) – continuous.
From 250°F to 500°F (121°C to 260°C) – intermittent
Set Time: Tack free in 3 – 5 minutes at ambient temperatures of 50°F to 80°F (10°C to 27°C)
Cure Time: Cures in 30 minutes at temperatures between 50°F to 80°F (1O°C to 27°C)
| Part No | Description | Case Quantity | Case WT (lbs) |
| GRR2x12BLK | 2″x12′ BLACK (5.08cm x 3.6m) | 10 | 7 |
Tensile Strength: ASTM D 3039, 24,950 PSI/in width/172 MPa
Flexural Yield Strength: ASTM D 790-1-B, 12,005 PSI (844 kg/cm²)
Durometer Hardness: ASTM D 2240, 63 (Shore D)
Major University
"I've never had much faith in 'patch it' type repairs, but to avoid long downtimes at our dorms we tried your product with success. We have used this product five or six times and saved hours in downtimes. Thanks."
