Toll Free: +1 (800) 523-7867
|

Stop It® Pipe Repair System

Stop It® BoreShield™ ARO II

Wear Resistance Products

Stop It® BoreShield™ ARO II

STOP IT® BoreShield ARO II System is a field-applied abrasion resistant outerwrap (ARO) consisting of a unique, heavy duty fiberglass reinforcement and water-activated urethane resin, designed for impact and abrasion resistance in weld seam, pipeline, directional drilling and piling applications.

The STOP IT® BoreShield ARO II System provides protection from external wear, abrasion, and impact events. The composite system includes a custom weave, heavy fiberglass tape, pre-coated with a toughened, water-activated urethane resin. The high bond strength provides resistance to shear if pipe is to be pulled and the unique weave of the reinforcement tape enables spiral applications for ease of installation on long runs of pipe or pilings. Installation entails only wrapping the composite around the area in need of protection and subsequent compression banding. The STOP IT® BoreShield ARO II System can be applied underwater without any influence on final material properties or cure rate.

Attributes

  • Excellent abrasion, impact, and wear resistance
  • Installed over tapes and coatings to protect weld seams
  • Superior toughness and resistance to environmental degradation
  • Strong adhesion to pipe surfaces
  • Water activated urethane resin system fully cures to an inert fully encasing matrix
  • Requires minimal pipe preparation
  • Spiral applications provide simple pathways to targeted thickness
  • Installed with no hot work, regardless of weather conditions, pipe orientation, or local geometries

STOP IT® BoreShield™ II - a field-applied abrasion resistant outerwrap

Set Time: Tack free in 20 to 25 minutes at ambient temperatures of 50°F to 80°F (10°C to 27°C).
Set time is slower below 50°F and faster above 80°F.

Heat Resistance: From -20°F up to 250°F (-29°C to 121°C) – continuous.
From 250°F to 500°F (121°C to 260°C) – temporary exposures.

Shelf Life: 6 months from date of purchase when stored at 40°F to 83°F (5°C to 28°C) with proper stock rotation.

Color: Black, Safety Yellow

Impact Strength: 345 in-lbs (39.0 J)

Wear Resistance: 2,208 cycles per mil loss (ASTM D4060, Taber CS17 abrasion wheel)

Gouge Resistance: 19 mil gouge depth (CSA Z245.20)

Hardness: 60 Shore D. (ASTM D 2240 measured at full cure)

Description: STOP IT® BoreShield ARO II tapes are available in 12.5” widths and in 30’ lengths; custom lengths to match project specific needs also available. These products are supplied in a sealed foil pouch with installation instructions.

Complete the form below to request documents.

* Indicates Required Selection
  • Please select each product for which information is being requested. Multiple products may be selected at the same time. Documents will be immediately forwarded by email.

close-link