Toll Free: +1 (800) 523-7867

Stop It® Pipe Repair System

Stop It® BoreShield

Wear Resistance Products

Stop It® BoreShield

The STOP IT® BoreShield system is a fast curing, in-field composite wrap system, ideal for joint reinforcement, abrasion resistance and corrosion protection in certain pipeline installations and saddle support applications.

The STOP IT® BoreShield system includes a strong fiberglass knitted tape, pre-coated with fast setting water-activated urethane resins. Installation simply involves wrapping the tape around the area in need of protection. STOP IT® BoreShield can be installed by one person with no special tools or hot work, and provides for quick, in-field applications, regardless of weather conditions, pipe orientation, or local geometries. Recommended for use on pipes less than 12 inches in diameter. We recommend contacting InduMar with the specific conditions and requirements of your project.

Kit Contents

  • STOP IT® knitted fiberglass tape precoated with water-activated polyurethane resins
  • Gloves for easy clean up
  • Detailed directions


  • Can be applied to wet or dry surfaces
  • Superior resistance to environmental degradation
  • Excellent abrasion and impact resistance
  • Strong adhesion to pipe surfaces
  • Water activated urethane resin system cures to form an inert, fully encasing matrix
  • Requires minimal pipe preparation
  • Knitted fiberglass construction ensures excellent conformability to tees, elbows, saddles, joints, and step profiles


  • Excellent abrasion and impact resistance
  • Strong adhesion to pipe surfaces
  • Superior resistance to environmental degradation
  • Can be applied to wet or dry surfaces
  • Easily conforms to irregular shapes


  • Girth Weld Protection in Horizontal Boring Projects
  • Saddle Support Applications


  • Improves efficiency of utility field personnel

Stop It® BoreShield™ for Directional Drilling
Corrosion protection and abrasion resistance in saddle support
Boreshield Wear Resistant Coating for Directional Drilling

Set Time: Tack free in 3 to 5 minutes at ambient temperatures of 50°F to 80°F (10°C to 27°C). Set time is slower below 50°F and faster above 80°F.

Heat Resistance: From -20°F up to 250°F (-29°C to 121ºC) – continuous. From 250°F to 500°F (121°C to 260°C) – temporary exposures.

Shelf Life: 2 years from date of purchase when stored at 40°F to 83°F (5°C to 28°C) with proper stock rotation.

Color: Black

Part No Description Case Quantity Case WT
BS412 4″ x 12′ BLACK (5.08cm x 3.6m) 10 8
BS425 4″ x 25′ BLACK (5.08cm x 3.6m) 10 14

Tensile Strength: 24,950 PSI/in width /172 MPa (ASTM D 3039).

Modulus: 62,505 PSI/4309 MPa (ASTM D 3039).

Flexural Yield Strength: 12,005 PSI / 82.77 MPa (ASTM 790).

Durometer Hardness: 63 Shore D (ASTM D 2240) measured at full cure.

Complete the form below to request documents.

* Indicates Required Selection

"*" indicates required fields

Please select each product for which information is being requested. Multiple products may be selected at the same time. Documents will be immediately forwarded by email.
For which products are you requesting documents? (select all that apply)*

error: Content is protected !!