Stopping corrosion on pipes and tanks is a must in any facility – but it can be a costly, time-consuming process. Or, it used to be.

The Viscotaq® line of corrosion protection products were developed in cooperation with the leading companies in the oil-and-gas industry and polymer engineering companies to be the ultimate solution for corrosion prevention.

Viscotaq® EZ Wrap is a versatile and economical wrap for corrosion control in areas where water infiltration is a problem. The material is strengthened by a fiber mesh imbedded in the middle of the material and has a white polyester non-woven fiber top layer that allows for immediate painting or coating after installation. It will adhere to any surface without a primer.

EZ Wrap is the ideal product to seal tank chimes, roofing, air conditioning inlets and outlets and can be used for the encapsulation of lead.

  • Excellent sealing and adhesion properties
  • Immediate adhesion to steel, PE, PP, epoxy, polyurethane and PVC without roughening
  • No cure or hardening time required
  • Storage stable (dry/cool) with an unlimited shelf life

Jump to technical specs

Viscotaq® Application and Product Data sheets

Viscotaq® EZ Wrap Data Sheets

Contact us to order EZ-Wrap

 

Viscotaq® is a registered trademark of J. van Beugen Beheer b.v.

Primary Applications:

  • Storage tanks
  • Soil to air transitions
  • Pipe coating rehabilitation
  • Bridge crossings
  • Encapsulation of lead base paint
  • Metal roof seams, flashings
  • Residential and commercial roofing
  • EPM roofing
  • Pipe and cable entries
  • Holes and voids, cracks
  • Industrial pools
  • Manholes
  • Cable joints and repairs

Viscotaq® EZ Wrap is also used in conjunction with
Viscotaq® ViscoSealant.

viscotaq EZ Wrap on tank chime dist by indumar

 

 

Technical Information

Easy to apply
Long term protection
Non toxic
Weather/salt resistant
Works from -22°F to 158°F
Patented technology
Cold applied
Environmental friendly
No primers

UV resistant
Weather resistant
Molds and forms easily
Solves difficult problems
Compatible with dry coatings
Tested according to latest specifications
ISO9001
Made in the USA
Dispensed in 70 mil rolls

Color: Gray
Odor: None
Density: 1.4
Perm rating: <0.0050 g/m2/24h/ccHg
Water Intake <0.4% (compound)
Spec Electric Resistance: >1012 ohm cm
Viscosity: Visous Elastic solid (putty like)
pH: Neutral
Shelf Life: Unlimited
Max. Operating Temp. 158°F, melting point 265°F
Min. Operating Temp. -50°F
Adheres to Wet Surface: No
Min. Temp. (no cracks) -22°F
Application: Above and below grade applications