Toll Free: +1 (800) 523-7867
|

Stop It® Pipe Repair System

Viscotaq® ViscoWrap

Corrosion Control Products

Viscotaq® ViscoWrap

Corrosion prevention for industrial pipelines

The Viscotaq® line of corrosion-prevention coatings was developed with leading oil and gas and polymer engineering companies to be the ultimate solution for corrosion control – a solution that keeps your infrastructure corrosion free for up to 40 years.

The unique chemistry of Viscotaq® gives it permanent wetting characteristics, allowing the material to flow into the pores and anomalies of the substrate. Its viscous elasticity gives it the strength and feel of a solid but the characteristics of a liquid – it won’t crack like a solid or run or sag like a liquid. Rather, it remains in a semi-solid state that provides high-impact strength and high resistance against sheering.

Application

Viscotaq® products stop corrosion in its tracks, and as the pipe shrinks or expands, it will conform to the pipe changes without cracking.

How It Works

ViscoWrap-ST is a non-shielding coating wrap that can be applied without primers, forming a homolog layer after application. It doesn’t show sliding, dripping or thickness changes since it’s solid with a true melting point of around 150ºF.

Flexibility

Viscotaq® products stop corrosion in its tracks, and as the pipe shrinks or expands, it will conform to the pipe changes without cracking.

Viscotaq® ViscoWrap Corrosion Control Pipe Wrap

Physical state: Semi solid

Appearance: blue tape

Odor: No odor

Specific Gravity: 1.2-1.45 kg/m3

Vapour Density: 0 (air =1)

Solubility: Insoluble in water

Freezing point (°C): <-35

pH: Not applicable

Melting Point (°C): >120-150

Flash point (°C): >204

Flammability: Not flammable

Auto Ignition temperature (°C): >400

Part No Description Case Quantity Case WT
(lbs)
V155 ViscoWrap, 4″ x 33′ ; (TX 4230) 6 43
V160 ViscoWrap, 6″ x 33′ ; (TX 4260) 4 43
Other Sizes May be Available – Contact InduMar

Shelf Life: Unlimited

Water Vapor Permeability: <0.0050 g/m/2/24mmHg ASTM D1653-03

Water Absorption: 0.5% ASTM D570-98

Water Penetration: <.14%, 1800 Hrs, 6v, 3% NaCl, ASTM G9-87

Cathodic Disbondment: Self healing, ASTM Class 1, 30 days, ASTM G8, 74 °F (23 °C)

Hardness: 36 Shore A, ASTM D2240-04

Adhesive Strength: 5.3 N/cm ASTM D1000

Operating Temperature Range:
ViscoWrap: -43 °F to + 160 °F (-42 °C to 71 °C)
ViscoWrap HT: -31 °F to + 212 °F (-35 °C to 100 °C)

Complete the form below to request documents.

* Indicates Required Selection
Please select each product for which information is being requested. Multiple products may be selected at the same time. Documents will be immediately forwarded by email.
For which products are you requesting documents? (select all that apply)*

close-link