Toll Free: +1 (800) 523-7867
|

Stop It® Pipe Repair System

Pipe Leak Control Kits C2 & C3

Leak Sealing Products

Pipe Leak Control Kits C2 & C3

Designed to quickly respond to leaks in straight runs of piping. Simply snap the clamp around the pipe, drop bolt head through open-slotted lug, and tighten nuts. Versatile clamps respond to water, wastewater, fuel, chemical, air and gas leaks.

Repair clamps are made of corrosion-resistant 304 stainless steel, lugs are made of rugged-ductile iron and shop coated for added protection. Bolts are plated for longer life. A choice of gasket material offers superior resistance to oils, aromatic and aliphatic hydrocarbons, condensates, gasoline and natural gas.

All External Pipe Leak Control Kits include extra-solid neoprene and closed-cell foam gasket material for odd-sized, out-of-round, and corroded pipe applications. Accompanying tools are available in standard or non-sparking versions. Kits are packaged in a heavy-duty carrying case.

Series “C-2” contains 10 assorted clamps for ½” through 4” diameter pipe, extra gasket material and installation tools. Clamp sizes are 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”, 3 1/2”, 4”.

SERIES “C-3” contains three large clamps for 5”, 6” and 8” diameter pipe, extra gasket material and installation tools. Clamp sizes are 5”, 6” and 8”.

assorted clamps for straight pipe leak repair
straight pipe leak repair kits

Shelf Life: Two years from date of purchase when stored at 40° to 83°F (5° to 28°C)
Color: White or black
Tensile Strength: 24,950 PSI / in width/172 MPa
(ASTM D 3039).

Flexural Strength: 12,005 psi/82.77 MPa (ASTM 790)
Durometer Hardness: 63 (Shore D) (ASTM D 2240)
Pressure Retaining Capability: Recommended for pressures up to 400 psi (28 kg/cm2)
Temperature Resistance: Continuous: -20° to 250°F (-29° to 121°C)
Intermittent: 250° to 500°F (121° to 260°C)
Set Time: 3 to 5 minutes at 50° to 80°F (10° to 27°C)
Cure Time: at 1/2`` thick (1.27 cm) - 30 minutes

Part NoDescriptionCase QuantityCase Wt. LBS
LEAK CONTROL KITS
63050STOP IT® First Response Kit116
63100AE General Purpose Vessels, Tanks & Drums135
63110D General Purpose Drums120
63120C-1 Style Pipe Pluger 3/4-4″135
63130C-2 Pipe Patch Clamps 1/2″-4″ Nominal Size135
63140C-3 Pipe Patch Kit 5″,6″ & 8″122
63150F Style Rollover for Large Holes in Vessels132

The Stop It® Pipe Repair System has been subjected to intensive testing and complies with US DOT 49CFR parts 192 and 195, and ASME PCC-2 article 4.1.

Compatibility
Generally, Stop It® may be used with products that are compatible with polyurethane plastic. The end user must always determine the suitability of the product for its intended use and recognize that the durability of the repair may be affected by strong acids or bases.

Stop It® Pipe Repair System Data Sheets

Chemical Resistance
No visible changes in Stop It® after an immersion term of 35 days in the following chemicals:

Acetic Anhydride Ammonia
Ammonium Hydroxide (10%)
Decyl Ammonium Chloride
Diesel Fuel
Diethyl Ether
Ethyl Acetate
Ethyl Ether
Ethylene Glycol
Gasoline

Hydrochloric Acid (10%)
Lube Oil
4-Methyl 2-Pentanone
Mineral Spirits
Sodium Hydroxide (50%)
Sulfuric Acid (10%)
Sulfuric Acid (25%)
Varsol
Xylenes, Mixed o-, m- and p

Potable Water
The Fix Stix Epoxy included with each kit is certified to NSF/ANSI 61 for Drinking Water.

Safety Features
Even under extreme pressures, the Stop It® Pipe Repair Tape will not shatter or crack. Stop It® releases pressures slowly.

When tested to the failing point in laboratory conditions, failure was indicated by a reduction in line pressure and seepage.

Complete the form below to request documents.

* Indicates Required Selection
close-link