Leak Sealing Products
SpillCorral™ rounds up fugitive ﬂuids in industrial settings. The ﬂexible berm is constructed of multiple proprietary urethanes, with the contacting tacky surface providing adhesion and the upper body providing a ﬂexible barrier. SpillCorral™ is installed by firmly placing on any oil-free, ﬂat surface. The bottom of the barrier forms a physically reversible bond to most surfaces, allowing the barrier to be reused.
SpillCorral™ provides a temporary solution to leaks and spills by diverting the ﬂow of liquids away from drains and sensitive equipment or by retaining the ﬂuid until it can be recovered. The 4-inch height of the barrier ensures that significant volumes can be retained. The 5-foot length and ﬂexible character allows the barrier to be easily installed in a variety of geometries. Multiple sections can be connected to contain larger spills. These sections are assembled by simply mating the end connections found on each barrier.
Shelf Life: Two years from date of purchase when stored at 40° to 83°F (5° to 28°C)
Color: White or black
Tensile Strength: 24,950 PSI / in width/172 MPa
(ASTM D 3039).
Flexural Strength: 12,005 psi/82.77 MPa (ASTM 790)
Durometer Hardness: 63 (Shore D) (ASTM D 2240)
Pressure Retaining Capability: Recommended for pressures up to 400 psi (28 kg/cm2)
Temperature Resistance: Continuous: -20° to 250°F (-29° to 121°C)
Intermittent: 250° to 500°F (121° to 260°C)
Set Time: 3 to 5 minutes at 50° to 80°F (10° to 27°C)
Cure Time: at 1/2`` thick (1.27 cm) - 30 minutes
|Part No||Description||Case Quantity||Case Wt. LBS|
|CS445||SpillCorral™ 4″ x 4″ x 5′||1|
Base Material: Proprietary urethane
Dimensions: 4” x 4” x 5’
Shipping Weight: 13.2 lbs (6 kg)
Color: Safety orange
Units: 1 per box
Intended Use: Spill containment
Number of Uses: Multiple when cleaned and stored properly between uses.
Inspect before each reuse.
Containment Area: Variable, through connection of multiple barriers
Storage: Original box on protective release paper
Chemical Resistance: Excellent when used with hydrocarbons, mineral oil, lubricants,aqueous salt solutions
Avoid Use With: Inorganic acids, ketones, chlorinated solvents
Temperature Limits: Urethane stable to 220ºF